This race ready K1 drydeck is designed for paddling in cold weather.
The JACKPOT spraydeck is here to complete the Jackpot vest for the ultimate high performance winning combo.
- SIROCCO
- Ergonomic design specific to slalom racing keeps the top snug without restricting your freedom to move.
- The wrist and neck cuffs are made from very comfortable, thin and flexible BrushSpan 2.0 Sigma e.prene.
- Wrists additionaly have latex gaskets to keep all water out.
- Made from Airfour Light fabric which is durable yet light weight and pleasantly breathable.
- A K1 sprayskirt to complement your Jackpot vest.
- The Jackpot skirt has a built in pocket to securely hold the external foam pillow from the Jackpot vest.
- The pocket is designed to perfectly fit the pillow, keeping any extra water out yet allowing it to sit compressed low without raising the profile of the deck.
- The top deck of the pocket is made from a very flexible fabric with a PU coating keeping it extremely low weight.
- Made from NTX2 Flex neoprene to ensure water tightness along with a very light weight, and thanks to the flexibility it naturally moves with the racer without resistance. NTX2 Flex is specifically used on our top end racing skirts.
- The fit has been tailored to fit the rims of K1 slalom cockpits allowing it to be easily put on, keeping the boat dry and eliminating any unnecessary material.
- The pull tab for quick release (should the need arise) is made from a thin and lightweight webbing to minimize the risk of accidental touches.
| Air4 | Main Material |
| SealGlide | Neck Gasket |
| Latex+ | Wrist Gasket |
| DuoBase 4.0 Alpha | Waistband |
DuoBase 4.0 Alpha | SealGlide
Neoprene is an impressionable fabric that should be cared for after each use and prepared correctly for long term storage. Dirt and grime can rub and cause abrasions over time so it is best to rinse off between uses. When the neoprene is going to be stored over a longer period of time use a mild detergent and clean thoroughly. Most importantly though make sure that the neoprene is fully dried before storage to prevent possible long term issues and odors. Finally, do not hang with clamps or fold when not in use as this can reduce the elasticity of the material.
Latex+
Latex+ material care involves addressing the unique needs of both components. Rinse thoroughly after every use to remove residue that could degrade the latex gasket or neoprene sleeve. Treat latex sections with silicone lubricant regularly to maintain elasticity, while using mild detergents on the neoprene portions to keep the sleeve odor-free and flexible. For storage, ensure the gasket is free from stress or sharp objects, and keep the neoprene sleeve flat in a cool, shaded area to avoid brittleness.
Air4
Synthetic membrane materials require thorough cleaning after each use to remove sand, dirt, salt, and oils, which can obstruct the pores and impair their multi-layered functionality. Wash with water and a mild, non-residue detergent, ensuring all soap is thoroughly rinsed away while avoiding fabric softeners or bleach, as these can compromise the membrane’s structure. Allow the material to air dry completely in a well-ventilated area, away from heat and UV rays, to preserve its integrity. For storage, hang or lay the item flat without folding to prevent creasing and stress, and always use underlayers during wear to minimize skin oil accumulation on the membrane.
































Reviews
There are no reviews yet.